一种新型有机电致微腔结构的双模发射

采用结构Glass／DBR／ITO／NPB／NPB：Alq／Alq／Al制作了有机微腔电致发光器件。将空穴传输材料与发光材料以一定比例混合作为发光层，为了便于对比，在不改变有机层的膜厚的情况下同时制作了传统的异质结微腔器件，发现两种器件的发光光谱有很大不同，器件的复合效率与传统的异质结器件相比也得到了很大提高，这是因为将两种有机材料混合能消除界面势垒，提高器件的复合效率，从而提高了器件的发光性能，实现了微腔双模发射，且两个模式的半峰全宽分别为8nm和12nm。通过进一步优化器件结构可以实现微腔白光发射。     

二氯和邻菲罗啉二酮的镍(Ⅱ)、铜(Ⅱ)、锌(Ⅱ)配合物的合成与表征

以ＭＣｌ２和配体Ｌ（Ｌ＝１，１０－菲罗啉－５，６－二酮）为原料，合成了标题配合物ＭＬＣｌ２，Ｍ＝ＮｉⅡ，ＣｕⅡ，ＺｎⅡ，并经元素分析、热谱、ＩＲ和摩尔电导表征．三者均为四配位的电中性配合物，热稳定性高于５００Ｋ，易溶于ＤＭＦ、ＤＭＳＯ和吡啶，可溶于乙腈和水．它们在ＤＭＦ中于３５０ｎｍ和３１５ｎｍ附近显示出强的Ｍ－Ｌ荷移跃迁     

A hybrid-Trefftz element containing an elliptic hole

Much work on special elements that simplify geometrical modelling of structures containing holes, cracks and/ or inclusions has been reported extensively in the literature. This paper presents a hybrid-Trefftz element containing elliptic hole formulated using Hellinger–Reissner principle by employing trial functions based on the mapping technique and the Cauchy integral method. The element presented in this paper could be regarded as an improved formulation over Piltner [Special finite elements with holes and internal cracks, Int. J. Numer. Methods Eng. 21 (1985) 1471–1485] element because the chosen trail functions in this paper have provided relatively more stable solutions. The use of the element with other ordinary displacement-based finite elements has also yielded very accurate solutions even when very coarse meshes relative to the size of the elliptic hole have been used.     

Design and Fabrication of 1.06 μm Resonant-Cavity Enhanced Reflective Modulator with GaInAs/GaAs Quantum Wells

A resonant-cavity enhanced reflective optical modulator is designed and fabricated, with three groups of three highly strained InGaAs/GaAs quantum wells in the cavity, for low voltage and high contrast ratio operation. The quantum wells are positioned in antinodes of the optical standing wave. The modulator is grown in a single growth step in an molecular beam epitaxy system, using GaAs/AlAs distributed Bragg reflectors as both the top and bottom mirrors. Results show that the reflection device has a modulation extinction of 3 dB at -4.5 V bias.     

Boiling heat transfer characteristics of nanofluids in a flat heat pipe evaporator with micro-grooved heating surface

An experimental study was performed to understand the nucleate boiling heat transfer of water–CuO nanoparticles suspension (nanofluids) at different operating pressures and different nanoparticle mass concentrations. The experimental apparatus is a miniature flat heat pipe (MFHP) with micro-grooved heat transfer surface of its evaporator. The experimental results indicate that the operating pressure has great influence on the nucleate boiling characteristics in the MFHP evaporator. The heat transfer coefficient and the critical heat flux (CHF) of nanofluids increase greatly with decreasing pressure as compared with those of water. The heat transfer coefficient and the CHF of nanofluids can increase about 25% and 50%, respectively, at atmospheric pressure whereas about 100% and 150%, respectively, at the pressure of 7.4 kPa. Nanoparticle mass concentration also has significant influence on the boiling heat transfer and the CHF of nanofluids. The heat transfer coefficient and the CHF increase slowly with the increase of the nanoparticle mass concentration at low concentration conditions. However, when the nanoparticle mass concentration is over 1.0 wt%, the CHF enhancement is close to a constant number and the heat transfer coefficient deteriorates. There exists an optimum mass concentration for nanofluids which corresponds to the maximum heat transfer enhancement and this optimum mass concentration is 1.0 wt% at all test pressures. The experiment confirmed that the boiling heat transfer characteristics of the MFHP evaporator can evidently be strengthened by using water/CuO nanofluids.     

A highly sensitive and rapid assay for protein determination in human urine and penicillin using a Rayleigh light-scattering technique with benzeneazo-8-acetylamino-1-naphthol-3,6-disulfonic acid sodium salt.

A simple and sensitive method was conducted for the determination of trace amounts of proteins with benzeneazo-8-acetylamino-1-naphthol-3,6-disulfonic acid sodium salt (azophloxine, AP) using a Rayleigh light-scattering (RLS) technique. At pH 2.60 and in the presence of an emulsifier OP microemulsion, the RLS of AP can be greatly enhanced by proteins, owing to the interaction between AP and protein. The enhanced intensity is proportional to the concentration of proteins. Four proteins, including bovine serum albumin (BSA), human serum albumin (HSA), lysozyme (Lys) and gamma globulin (gamma-G) have been tested. For example, the linear range of BSA was 0 - 0.06 microg mL(-1) with detection limits of 2.38 ng mL(-1). The method was applied to the analysis of protein in human urine and penicillin samples with satisfactory results. The relative standard deviation was in all instances less than 4.0%, and the recovery was in the range of 97.5 - 104%.     

Retracted: Determination of scutellarin isomer,a predominant metabolite of scutellarin,in human plasma by HPLC/tandem mass spectrometry and its application to a pharmacokinetic study in Chinese healthy volunteers

Retraction: The following article from Biomedical Chromatography, “Determination of scutellarin isomer, a predominant metabolite of scutellarin, in human plasma by HPLC/tandem mass spectrometry and its application to the pharmacokinetic study in Chinese healthy volunteers” by Chun‐hua Xia, Yu‐qing Xiong, and Guang‐ji Wang, published online on 21 June 2007 in Wiley Interscience (www.interscience.wiley.com/journal/bmc), has been retracted at the authors' request.     

关于非线性Schrodinger方程混合问题解的破裂和质量集中

本文讨论了一类非线性Ｓｃｈｒｏｄｉｎｇｅｒ方程混合问题解的破裂现象，ｂｌｏｗ－ｕｐ时刻的估计和质量集中定理，并推广和改进了［ｌ～３］中的结果．     

偶氮侧基聚合物光致异构动力学研究

本文对偶氮侧基聚合物相位共轭光时间特性进行了研究,得到了相位共扼光产生机制─光致异构过程的时间常数.在相位共轭光上升阶段,其时间常数在0.4～0.5s之间,在相让共轭光的衰减过程,衰减满足双指数关系,分段拟合得到较好的结果,且得到快过程的时间常数为0.27s,慢过程的时间常数为0.78s.     

Eu^2＋：BaFCl光激励发光过程中紫外线的激发与漂白效应

通过改变紫外线的辐射照能量范围，研究了Ｅｕ＾２＋：ＢａＦＣｌ的光激励发光性质。发现紫外线能量大于Ｅｕ＾２＋的最低激发态能量及紫外线的能量小于Ｅｕ＾２＋最低激发态的能量两种情况下，光激励发光具有明显的差异，分析了产生差异的原因，给出了紫外线的辐照能量发生转时所对应的能级位置。